§ 19.09.180. Design requirements.

(a)

All signs shall be designed and constructed to withstand wind pressure and dead loads as required by the adopted Building Code for the City.

(b)

Uprights, braces, or other supports of any ground sign shall not extend further than three (3) feet on either side of the rectangular area enclosing the sign copy, unless otherwise approved.

(c)

Ground signs may not exceed six (6) feet in height for residential land uses and eight (8) feet in height for commercial or industrial land uses, unless otherwise stated herein.

(d)

Permanent signs shall be designed to fit the character of the area in which they are placed and the design, appearance, color scheme, and character of the building to which they are associated.

(e)

Signs may be designed to a maximum size based on the type of sign that is constructed. Further size limitations may be stated within the District Signage Regulations of this chapter.

Sign Description	Size Regulations Max Size (sf)
Awning/Canopy	50
Electronic Message/Reader Board	50
Marquee/Projecting	100
Ground	100
Billboard	200
Freestanding/Pole	200
Roof	300
Wall	300